Select the search type
  • Site
  • Web

You are here  >  CEWD  >  IndustrialTraining  >  CNC Machinist

CNC / Machining

Learn the Skills Needed to Get a Job and Launch a Career as a Machinist

From manual milling and turning, to CNC skills - students will gain hands-on experience in our state-of-the-art machine shop and CNC simulator labs. Students will be trained with the necessary skills to enter the workforce.

Small class sizes ensure the best possible learning environment for metalworking students. The curriculum combines classroom instruction and hands-on skills development focusing mainly on CNC operation and setup.

Try a FREE Workshop Before You Pay for a Course!!

Introduction to CNC, One-Day Workshop  FREE!
In this FREE one-day workshop you will learn 10 basic G and M Codes, how to set a Z zero on a lathe, and how to cut chess pieces on the lathe.  Attendees take home a chess piece as a souvenir!  Students must register for the class prior to the start date.

 Date Time Day Room Instructor
 10/14/17 10:00AM -  01:00PM Saturday D117 K Wert
 12/09/17 10:00AM - 01:00PM Saturday D117 K Wert

CorelDRAW for Laser Engraving, One-Day Workshop  FREE!
In this FREE one-day workshop you will learn how to use CorelDRAW X7 and an Epilog Helix CO2 Laser System to engrave on wood, coated metal, acrylic, stone and other mediums.  Student should be familiar with a Windows-based operating system and provide a 4GB flash drive to back up course work.  Students must register for the class prior to the start date.

Date Time Day Room Instructor
10/14/17 10:00AM -01:00PM Saturday D117 K Wert
12/09/17 10:00AM - 01:00PM Saturday D117 K Wert

For more information call 281-756-3670 or

Register for these FREE one-day workshops on ACC Marketplace

NCCER Millwright 160-Hour Program  New Program!

Alvin Community College's new 160-hour Millwright program will prepare you for the necessary skills to enter the workforce. The program follows the National Center of Construction Education Research (NCCER) Level 1 guidelines.  The program consists of two courses.  The courses are the NCCER Core and NCCER Millwright Level 1.  Students must take the NCCER Core before enrolling in the NCCER Millwright Level 1 course.  The program will introduce you to the many different skills in the millwright trade.  This hands-on program will teach you how to use basic hand and power tools and review various fasteners.  You will learn about common blueprint symbols and be able to demonstrated different layout techniques.  You will discuss and demonstrate the safe use of manual lathes and mills in basic cutting concepts and techniques.  You will be able to demonstrate the use of various indicators for the purpose of aligning parts to the machine.   Upon successful to the two courses you will be prepared for NCCER Level 1 testing.  Total tuition and fees for the 160-hour program is $2,100.00 for in-district students and $2,140 for out-of-district students.

Upcoming Classes

Alvin Campus


 Course No Date(s) Time  Day
 CEOSHT 1015 ACC1 10/03/17 - 10/11/17 08:00AM - 05:00PM MTW
 CEOSHT 1015 ACC2 11/27/17 - 12/05/17  08:00AM - 05:00PM MTW

NCCER Millwright Level 1  New Course!

Note:  Students must have successfully completed the NCCER Core before enrolling in this class.

Course No. Date(s)  Time Day
 CEMCHN 1025 AC01 10/16/17 - 11/20/17 08:00AM - 05:00PM MTW
 CEMCHN 1025 AC02 12/06/17 - 01/31/18 08:00AM - 05:00PM MTW

Request more information about the new 160 - hour program at or call 281-756-3670

REGISTER in Building H, Room 103

Industrial Maintenance Program   New Program!
Alvin Community College's new Industrial Maintenance program follows NCCER Level 1 guidelines.  This program will introduce the student to many different skills in the industrial maintenance trade.  Skills include in the curriculum include identifying and using basic hand and power tools, review various fasteners and anchors.  In addition you will learn about different types of gaskets and packing seals as well as learn about the different types of valves and pumps and how to lubricate them.  You will also learn how to use different types of electrical test equipment as well as receive an introduction to rigging and Oxy-fuel torch cutting.

NCCER Industrial Maintenance Level 1   New Course!

Course No.  Date(s) Time Day Room Instructor 
 CECBFM 2017 AC)! 08/22/17 - 12/07/17 06:00PM - 10:00PM TTH D216 K Wert
 Tuition & Fees Tuition IN  $1,500 Tuition OD  $1,520 Other Fees $150.40  

Machining Special Interest Classes

Machine Shop Immersion Class  Night Classes!
This course is designed to simulate a real shop environment and experience in a fully functioning machine shop with the opportunity to be exposed to all aspects of a manufacturing facility to include: CAD design and code development using computer software; set-up and operation of Haas CNC mills and lathes as well as manual lathes and mills, also fixture design and development, cost estimating, inspection, and quality control. The student will be able to use various inspection equipment, calibrate cutting tools and set zero positions, read multiple styles of indicators and indicate a part in a 4-jaw chuck. 
COURSE REQUIREMENTS: Minimum age of 18 years.

Upcoming Class

Alvin Campus

Course No.
Date(s) Time Day(s)
CEMCHN 1091 AC01
09/13/17 - 10/23/17
06:00PM - 10:00PM
MW D117 K Wert
CEMCHN 1091 AC02 10/30/17 - 12/13/17 06:00PM - 10:00PM
MW D117
K Wert
 Tuition & Fees: Tuition IN $675.00
Tuition OD $695.00
Other Fees

Fundamentals of Laser Operations
  Night Class!
Students will gain hands-on experience with basic set-up and operation with an emphasis on safety, material removal, cutting processes and design creation using CorelDRAW X7. End-of-course outcome: Learn to safely set-up and operate an Epilog Helix C02 Laser System on multiple mediums including wood, stone, coated metal, acrylic, and others. Prerequisite: Experience with CorelDRAW or similar graphic software.

Upcoming Classes

Alvin Campus              

Course No.
Day Room
CELOTT 1091 AC01 09/19/17 - 11/02/17 06:00PM - 09:30PM
TTH D216
Tuition & Fees: Tuition IN $650.00
Tuition OD $670.00
Other Fees

Request more information about these courses at or call 281-756-3670  

REGISTER in Building H, Room 103